One Of The Most Useful Features Of The blackberry Curve Is Its Ability To Access gps Satellite Networks, Providing Utilities Such As Location-aware Services, Turn-by Turn Directions And A Map Of Where You Are. However, If You Have Just Activated The Gps, Or If There Is Something Wrong With It, You Might Need To Get It Set Up Before It Will Work For You.


Requirements:
● BlackBerry Curve with GPS ability


►step 1 Remove The Battery From The Blackberry Curve, Then Replace It. When The Blackberry Fully Reboots, You Should Be Able To Get A gps Signal Back.

►step 2 Check With Blackberry's Technical Support. There May Be A firmware Update For Your Phone That Will Allow It To Work With The Gps.

►step 3 Try The Gps Function Outside. Sometimes Gps Doesn't Function As Well Indoors As It Does Outside, And You Might Be Able To Get A Signal Out There.

►step 4 Take The Curve Out To An Open-air Area With As Few Obstructions (such As Buildings Or Trees) As Possible. Turn On Blackberry maps Or Your Preferred Gps Program, And Wait Up To 10 Minutes For The Gps To Calibrate.