Replacing A Damaged Blackberry After The Warranty Has Expired Can Be Costly. Even Repairing A Blackberry Can Be Just As Costly. You Can Buy The Screen, Keyboard, Lcd And Camera replacement Parts And Save Money By Replacing Them Yourself. Maybe Your Blackberry Needs A Good Cleaning. Either Way, The Phone Needs To Be Dismantled Before You Work On It. You Need steady Hands And The Right Tools. Stay Focused And You Can Save Yourself Time And Money.


Requirements:
● T5 torx driverSmall flat-head screwdriverCase open tool


►step 1   Microsd Slot Remove The Back Cover By Pushing The silver Button On Back And Sliding The Panel Off. Remove The Battery And Microsd Card In The Silver Slot.

►step 2   Use The t5 Torx Driver To Unscrew The Two screws On The top Edge Of The Blackberry.you Will See The Speaker Between The Two Screws.

►step 3   Blackberry Without Front casing And Rubber Key Pad Take Off The Microphone Cover On The Bottom Of The Phone Using The Flat-head Screwdriver To Pry The Four Tabs. Use The Case open Tool To Gently Loosen Sides Of The Blackberry By Sliding The Tool Along The Edge Of Both Sides Of The Blackberry. Now The Front Cover And Rubber key Pad Can Be Easily Taken Off.

►step 4   blackberry Curve Side Grips Unscrew The Four screws To Remove The Brass Keyboard Plate With The t5 Torx Driver. The Two screws At The Bottom Will Release The Side Plates.

►step 5   blackberry Curve Dismantled Separate The Back Case From The lcd Screen And motherboard By Gently Pulling Them Apart. Remove The bezel From The Lcd Screen. Lift Up The Lcd Ribbon And Use The Small Screwdriver To Gently Pry The Lcd From The Motherboard. The lcd Screen Is Lightly Glued To The Motherboard.